|
|
Mold Temperature Controller  HMC series mold temperature controller is used
for adjusting mold temperatures, using a heating unit and a cooling unit to control the temperature accurately. Features include: - Contains an import pump that has high pressure, high stability and no leakage
- Transparent glass to view levels
- Complete safety device. When any abnormal situation is detected, the indicator light will display.
- Safety main switch design. The main power can be turned off immediately should an emergency situation occur.
- High precision temperature controlled.
- Easy to install, convenient to operate.
Power Supply:
3 Phase 208V/220V/240V 60Hz
3 Phase 460V/480V 60Hz upon request Technical Data: Model | Temp. | Heat Capacity kw | Pump | Max. Pump Volume gal/min | Mold Connector | Dimension | Weight | ¡¡ | ¡¡ | ¡¡ | Centigrade | (in) | (lb) | | HCM-3-W | 95 (water) | 3 | 0.59 | 8.73 | 3/8" 1X2 | 29X14X25 | 125 | | HCM-6-W | 95 (water) | 6 | 0.75 | 13.23 | 1/2" 2X2 | 32X14X30 | 136 | | HCM-9-W | 95 (water) | 9 | 1.01 | 18.52 | 1/2" 2X2 | 32X16X30 | 171 | | HCM-12-W | 95 (water) | 12 | 1.45 | 35.71 | 1/2" 4X2 | 32X16X30 | 180 | | HCM-3-O | 150 (OIL) | 3 | 0.59 | 8.73 | 3/8" 1x2 | 29X14X25 | 143 | | HCM-6-O | 150 (OIL) | 6 | 0.75 | 13.23 | 1/2" 2x2 | 32X14X30 | 154 | | HCM-9-O | 150 (OIL) | 9 | 1.01 | 18.75 | 1/2" 2x2 | 32X16X30 | 187 | | HCM-12-O | 150 (OIL) | 12 | 1.45 | 35.71 | 1/2" 4X2 | 32X16X30 | 198 | | HCM-6-O (2D) | 150 (OIL) | 6x2 | .75x2 | 13.23x2 | 3/8" 4x2 | 32X22X30 | 242 | | HCM-12-O (2D) | 150 (OIL) | 12x2 | 1.45x2 | 35.71x2 | 1/2" 4X2 | 32X22X30 | 275 | |
|
|
